Irrigation Accessories


Global Irrigation, Inc. specializes in carrying varieties of Irrigation Accessories that are commonly used in different irrigation settings. Other than end-of-the-line figure eight, clamp to fasten the line, nail clamp to secure the line in place, and supporting hook used in holding the tubing on winery settings, we have much more to offer. For further product inquiry, please contact us. We will be glad to assist you further.
  • Figure 8 Clamp - F311
    F311 : Figure 8 Clamp
    Figure 8 End Clamps

    • Figure 8 End of line Clinchers for 1/2" tubing.
    • An easy and economical way to end a poly tubing line.
    • To use, simply push poly tubing into one hole, bend the tubing back, and slide the other hole over the end of the pipe.
    • Figure-Eight Poly Tube Clinchers are also available in below sizes.
      For 3/4" Poly tubing (our part No. F312)
      For 1" Poly tubing (our part No. F313)
  • Ratchet Clamp - F321
    F321 : Ratchet Clamp
    Ratchet Clamp (Irrigation Tubing Clamp)

    • 1/2" Ratchet Clamp
    • Ratchet tubing clamp for up to 1/2" tubing (Accepts flexible tubing).
    • No worry for rusted, corroded, or distort situation.
    • 11-position strong ratchet teeth control allows adjustment of tightness.
    • Ratchet Clamp F321 can be used with our F series insert fittings F333 and F343
    • Ideal for low pressure irrigation systems in agricultural, horticultural, vineyard and landscape applications.
  • Irrigation Trellis Hanger - SH-20
    SH-20 : Irrigation Trellis Hanger
    Irrigation Supporting Hook

    • 20 mm Support Hooks (Also called Trellis Hanger).
    • Our SH-20 is used to suspend 3/4" tubing on trellis (overhead) wire.
    • Commonly used in vineyards, orchards, and greenhouses.
    • The top smaller hook hangs on trellis wire and push the poly tubing into the larger hook.
    • Also available in smaller size for ½" poly tubing: Our part no. SH-16
  • Nail Clamp - TC-700
    TC-700 : Nail Clamp
    • 1/2" Tube Saddle Clamp with Nail.
    • Used to attach poly tubing in place to fences and boarders in garden areas.
    • This nail clamp allows directly strapping the poly tubing on woods, masonry, or stucco surfaces for various irrigation placement needs.
    • Works with most brands of 1/2 poly tubing.
    • Black color provides good UV protection from color fading or cracking due to sun exposure
    • Available Spec is as below.
      TC-250N (Black)     1/4" Tube Clamp Fits 0.250" - 0.270" O.D Poly Tube
      TC-455 (Black)      3/8" Tube Clamp Fits 0.380" - 0.455" O.D Poly Tube
      TC-700 (Black)      1/2" Tube Clamp Fits 0.680" - 0.710" O.D Poly Tube
      TC-250-466C (Tan)   1/4" Tube Clamp Fits 0.250" - 0.270" O.D Poly Tube
      TC-455-466C (Tan)   3/8" Tube Clamp Fits 0.380" - 0.455" O.D Poly Tube
      TC-455-P454 (Ivory)  3/8" Tube Clamp Fits 0.380" - 0.455" O.D Poly Tube
    • Also Available in lighter colors to match the lighter colors of the tubing, mostly seen in misting or cooling system .
    • Tan Color is in Panton Color No. 466C.
      Ivory Color is in Pantone Color No. 454
  • Garden Hose Washer - WS34
    WS34 : Garden Hose Washer
    Garden Hose Washer for Hose Fittings

    • 3/4" Hose Washer fit inside a female hose fittings.
    • By creating a water tight seal this washer prevents leaks in hose threaded connections.
    • This standard hose washer creates a water tight seal and prevents leaking in the hose threaded connection.
    • Also available with Stainless Steel Screen Mesh Washer. A mesh screen washer creates a water tight seal while filtering some particles that may clog the drip system. A larger filter is still recommended to be installed on the main supply line to efficiently maintain the system.
    • (Please see above Screen Washer image)
      WSS34:    3/4" Hose Washer w/ Stainless Steel Screen – 60 x 50 Mesh
      WSS34-30:  3/4" Hose Washer w/ Stainless Steel Screen – 30 x 30 Mesh
  • Pipe Cutters - PVC3
    PVC3 : Pipe Cutters
    • PVC3 – Rigid PVC Pipe Cutter, 1/2" to 2 1/2"
      (Replacement Hardened carbon Blade – Our Product No. PVC3-RB)
      Makes a clean, smooth cut – Leaves no burrs.
      Cuts pipe faster than a hacksaw.
      Hooked jaw holds pipe in cutting position.
      Built-in ratchet assembly.
      Switch-Blade action for quick release of jaws.
    • Different cutter options are as below.
      PVC1 - Rigid PVC Tube/Pipe Cutter, 1/2" to 1 5/8"
    • Safety clip keeps handles closed when not in use.
    • Replace the hardened carbon blades, (Our Part No. PVC1-RB) are available.
    • PTC1 – Plastic Tube Cutter, cuts hose and poly tubing 1/2" to 1 1/2"
      Replacement Stainless Steel Blade –(Our Part No: PTC1-RB)
  • Pressure Gauge - PG-1
    PG-1 : Pressure Gauge
    • 2" (50mm) Size Pressure Gauge, 0-30 PSI – Liquid Filled, w/ 1/4"Male Hose Thread (MHT) Brass Inlet.
    • This water pressure gauge is used to helps you determine the water capacity that directly impacts the design and performance of the drip irrigation system.
    • Ideal to use in low pressure irrigation system.
    • Clear display allows accurate reading.
    • 1/4 inch NPT thread.
    • Also available with higher pressure reading. Our part no. PG-2 can read up to 100 PSI
    • Could be used with our Inline Screen Filter (IMF series) and Stainless Steel Screen Filter (SS series).
    • Application: Water, air, gas, oil and working fluid not corrosive to wetted parts.
    • Ring & Case: Stainless steel.
    • Movement & Socket: Brass
      Mounting: Bottom and Center back with surface, flush mount and U-Clamp.
    • Accuracy: +/- 1.5% of full scale
    • Operating Temperature Limit: -4 ~ 140°F (-20 ~ 60°C)
  • PVC Saddle Tees - SD-34-40
    SD-34-40 : PVC Saddle Tees
    • SD-34-40 is PVC Saddle Tee with 3/4" Socket (1" Spigot) outlet, and 4" Base (in Green color)
    • PVC Saddle Tee is used with PVC glue to quickly add a Tee in an existing PVC pipe line, without making a huge hole.
    • 8 Colors available (from 1 1/2" to 8") to identify different base sizes:
      Black 1 1/2"
      White 2"
      Gray 2 1/2"
      Brown 3"
      Green 4"
      Red 5"
      Blue 6"
      Orange 8"
    • Three series available with different Outlet sizes
      SD-12 Series : 1/2" Socket (3/4" Spigot), w/ 8 base sizes from 1 1/2" to 8"
      SD-34 Series: 3/4" Socket (1" Spigot), w/ 8 base sizes from 1 1/2" to 8"
      SD-100 Series : 1" Socket (1 1/4" Spigot), w/ 5 base sizes from 3" to 8"
  • Hose Cap - 750C
    750C : Hose Cap
    Female Hose Thread End Cap with Washer

    • 3/4" Female Hose Thread End Cap with a watertight washer.
    • Without End Cap, the water all runs out the end of the drip tube.
    • Periodically flush out the line is recommended to run the drip irrigation system more efficiently and maintain it longer life. An end cap comes in handy to close or open the lines.
    • Use a simple hose-thread cap to seal off male hose thread and remove it when flushing the system.
  • Irrigation Flush Valve - FV-FHT
    FV-FHT : Irrigation Flush Valve
    Female Hose Thread with Low Flow Automatic Flush Valve

    • 3/4" Female Hose Thread with Low Flow Automatic Flush Valve.
    • To be installed at the lowest point of the sprinkler zone.
    • Female hose thread flush valve is installed at the end of poly tubing by using .
    • a male hose end fitting or at a low point in the middle of a line using a male hose tee.
    • Prevents pipe from freezing by automatically draining irrigation line when water is shut off.
    • 3/4" Female Hose Thread end can be used with any fittings with male hose thread.
    • Automatic flush valves are available that flush the tubing each time when the water is turned on and pressure in the line drops below setting PSI.
    • It is effectively draining the line when the system shuts off which helps prevent prolonged dripping from watering devices, mineral build up, and freeze damage during the winter months.
  • Goof Plugs - GP-2
    GP-2 : Goof Plugs
    Goof Plugs (Mistake Plug)

    • Global Goof Plugs, also known us Mistake Plugs, feature 2 sized barbs on one plug to fit different hole sizes.
    • Dual Goof Plug also fits 0.170" and 0.220" I.D. (Inside Diameter) Tubing to close the end of the lines.
    • Widely used for plugging any unwanted holes in the irrigation supply line.  
    • The dual Goof Plug is commonly used to repair small or large holes in mainline tubing where an emitter or micro-sprayer was removed.
    • A handy and economic micro fitting for any irrigation repair jobs.
    • Black color is great for UV resistance.

  • Irrigation Hole Punch - GHP
    GHP : Irrigation Hole Punch
    Economic Irrigation Hole Punch

    • Global Hole Punch – An hole punch (key punch) to make precise holes in drip mainline tubing.
    • Make 3-5mm holes in mainline tubing.
    • Used for installing drip emitters or 1/4" barbed fittings.
    • An economic hole punch for quick smaller jobs.
    • Orange Hole puncher with Hexagonal base (our part no. GHP-O) is also available upon request. Hex base helps to install and remove spray jets and interchange their caps.
  • Anti Siphon Backflow Preventer - PASV
    PASV : Anti Siphon Backflow Preventer
    Anti-Siphon Backflow Preventer

    • Hose Bibb Vacuum Breaker
    • 3/4" FHT Inlet x 3/4" MHT Outlet
    • Includes a standard hose washer, creating a water tight seal to the connection.
    • Installed at the beginning of the irrigation system to create a siphon break.
    • Prevents water from going back to water supply.
    • When pressure drops, the breaker will open up and dump the water out, avoiding water contamination and flooding.
  • Quick Action Coupling - QAVB-450
    QAVB-450 : Quick Action Coupling
    Quick Action Valve Barb Fit

    • Quick Action Valve Barb x Barb Fits 0.350 - 0.380 I.D. Tubing.
    • It works on low pressure setting.
    • It also can be used with grommet for taken off.
    • A convenient valve built in on a barbed coupler allows easy control of water flow at any desired location.
    • Commonly used on a separate line aside from mainline to independently control on and off water flow after feeding nutrition or pesticide.
    • Other sizes are available to fit different tubing sizes:
      QAVB-450: 0.350 - 0.380 I.D.
      QAVB-600: 0.500 - 0.530 I.D.
      QAVB-700: 0.580 - 0.600 I.D.
      QAVB-800: 0.700 - 0.720 I.D.
    • Also available in different connection configurations:
      QAVS - Quick Action Valve 1/2" Slip Socket x 1/2" Slip Socket
      QAVC Series - Quick Action Valve Compression x Compression (w/ 4 sizes)
We have varieties of high-quality

Irrigation Accessories

to offer for different irrigation settings. We also pride ourselves on same-day shipping to ensure on-time delivery.
Italian, Italiano