Irrigation Risers


You are here: Home -> Products -> Irrigation Risers
Global Irrigation, Inc. specializes in having Irrigation Risers for various irrigation applications and settings. Our rigid risers come in 6", 8", 12", and 18" tall that can be easily used in most applications. We also have rigid risers assembled available for ready-to-connect to pipe and micro irrigation settings. For further product inquiry, please contact us. We will be glad to assist you with your selection.
  • Rigid Risers - RR8
    RR8 : Rigid Risers
    • 8 INCH Rigid Riser
    • Available in 4 lengths (as shown above):
      √ 6 INCH (our part no. RR6)
      √ 8 INCH (our part no. RR8)
      √ 12 INCH (our part no. RR12)
      √ 18 INCH (our part no. RR18)
    • Thick-walled ¼ tubing.
    • Ideal for used in micro irrigation systems in conjunction with micro emitters and fittings.
    • Accommodates all quick thread and any #10-32 micro-irrigation sprayers, and mini sprinklers.
  • Rigid Riser Adapter - RRAT
    RRAT : Rigid Riser Adapter
    Fittings for Rigid Riser

    • Rigid Riser fittings with #10-32 Thread Adapter on Both Ends (If not, it should be "with #10-32 on one end and quick thread on the other end).
    • #10-32 thread is for screwing into Rigid Riser and micro spray jets or 4mm (1/4 in.) micro supply pipe.
    • A convenient adapter to set up rigid risers to the desired height for above-ground applications.
    • Also available in 1/4" Barb Adapter x #10-32 Thread configuration (our part no. RRAB).
    • RRAB: Adapts 4mm rigid risers to 4mm flexible tubing. Usually works with rigid riser holding stake (Our part No.2014) for extra support.
  • Rigid Riser - RRAT-12
    RRAT-12 : Rigid Riser
    Rigid Risers Assembled with Adapters

    • 12 Inch Rigid Riser with #10-32 Thread Adapter.
    • Pre-assembled for immediate installation.
    • This Rigid Riser with a threaded 4mm inlet adaptor is used to elevate the height of micro jets, sprays and mini sprinklers, usually being popped into a clip stake  (our part no. 2012) or directly screwed into a drip tubing stake (our part no. 2014).
    • Also available with 1/4 Barbed Adapter configuration, as shown above.
      Available lengths in 6" (150mm), 8" (200mm), 12" (300mm), & 18" ( 450mm) (Our part no. RRAB-6, RRAB-8, RRAB-12, RRAB-18)
    • How to specify
      RRAT-12:  "12" Inch "R"igid "R"iser with "A"dapter "T"hread
      RRAB-6: "6" Inch "R"igid "R"iser with "A"dapter "B"arb
  • Drip Riser - RRAA-12
    RRAA-12 : Drip Riser
    Rigid Risers Assembled with 1/2” MPT Adapter

    • 12 inch Rigid Riser with 1/2" Male Pipe Thread Adapter
    • Pre-assembled for immediate installation
    • Can be used on PVC laterals, or with any 1/2" female threaded adapter
    • 1/2" Pipe Thread Adapter can be used to adapt sprinkler risers into water-efficient low-volume irrigation systems. Connect the male pipe thread with semi-rigid riser into the FNPT and thread the micro sprinkler or micro sprayer into the top of the PE riser. Accommodates #10-32 threaded emitters.
    • Can be used in virtually any position. Ideal for suspending from ceiling or ground installation.
    • RRAT-12 elevating the emitter 12" above the ground, allowing the spray to clear plant foliage
    • Available lengths in 6" (150mm), 8" (200mm), 12" (300mm), & 18" ( 450mm) (Our part no. RRAA-6, RRAA-8, RRAA-12, RRAA-18)
    • Individual 1/2" MPT Adapter for Rigid Riser
      (our part no. RRAA) is also available upon request
    • RRAA fits Rigid Riser with O.D. ranging from 0.298" to 0.307" (7.6mm-7.8mm)
  • Drip Irrigation Riser - RR8-6
    RR8-6 : Drip Irrigation Riser
    Rigid Risers Assembled with Stake

    • 8 Inch Rigid Riser with 6" Stake (as shown above on the left)
    • Ideal to elevate jet sprayers, foggers or threaded micro sprinklers, to increase the circumference of the wetting area
    • Ideal for use in flower beds and vegetable gardens
    • Barbed end inlet on the stake to connect 1/4 in. (4mm) micro tubing
    • Protected hood design on the stake to stabilize the rigid riser positioning
    • Available SPEC: 4 Length Rigid Riser (6, 8, 12 and 18 Inch) with 2 Type of Stake (6" Stake and 8" Stake with Valve)
      √ (RR#-6) for Rigid Riser on a 6" Stake:  RR6-6, RR8-6, RR12-6, RR18-6
      √ (RR#-8) for Rigid Riser on a 8" Stake with Valve: RR6-8, RR-8-8, RR12-8, RR18-8
    • 8 Inch Rigid Riser on 8" Stake with valve (our part no. RR8-8, as shown above on the right). The 8" Stake has a built-in flow control valve to easily adjust flow and spray radius
  • Swing Joint Assembly - SWJ-45-06-55
    SWJ-45-06-55 : Swing Joint Assembly
    Swing Joint Assemblies

    • Pre-assembled Swing Joints 6", 4 Elbows, 3/4" MPT x 3/4" MPT
    • Available Length in 6", 12" or 18" and with 3 or 4 Elbows configurations.
    • 3 Elbows with 1/2" MPT x 1/2" MPT and 1/2" MPT x 3/4" MPT configuration.
      4 Elbows with 1/2" x 1/2", 1/2" x 3/4", and 3/4" x 3/4" MPT configuration.
    • Operating Pressure Rating: 80PSI (Pressure Loss – 2 PSI at 6 GPM)
      Maximum Flow is 8 GPM
    • For convenient underground sprinkler installation.
    • Easy to adjust the sprinkler by rotating male pipe thread (MPT) inlet and outlet to the proper height, angle and placement.
    • How to specify code
    • ex. SWJ-45-06:
      4 = 1/2" MPT, 5 = 3/4" MPT
      45 = 1/2" MPT x 3/4" MPT  (44 for 1/2" on both ends)
      06 = 6" Funny Pipe (12 for 12" and 18 for 18"funny pipe)
      (Below "XX" indicates funny pipe length, 6"/ 12"/ 18" for configuration)
      √ SWJ-44-XX:  3 Elbows with 1/2" MPT on both ends
      √ SWJ-45-XX:  3 Elbows with 1/2" MPT on one end x 3/4" MPT on the other end
      √ SWJ-44-XX-54:  4 Elbows with 1/2" MPT on both ends
      √ SWJ-44-XX-55:  4 Elbows with 1/2" MPT on one end x 3/4" MPT on the other end
      √ SWJ-45-XX-55: 4 Elbows with 3/4" MPT on both ends
  • Poly Nipple - NPP05-Close
    NPP05-Close : Poly Nipple
    Poly Nipples
    • 1/2" NPT x Close Poly Nipple (Risers) - Thread End Male x Male to connect to 1/2" female pipe adapters.
    • Commonly used for permanent sprinkler and shrub set up.
    • Can be an easy addition to any existing risers.
    • Also available in 2", 3", 4", 5", 6", 8, 10" and 12"
      (Our NPP05 is with 1/2" NPT on both ends)
      NPP05-2: 2" Poly Nipple
      NPP05-3: 3" Poly Nipple
      NPP05-4: 4" Poly Nipple
      NPP05-5: 5" Poly Nipple
      NPP05-6: 6" Poly Nipple
      NPP05-8: 8" Poly Nipple
      NPP05-10: 10" Poly Nipple
      NPP05-12: 12" Poly Nipple
  • Sprinkler Riser Extender - 9210
    9210 : Sprinkler Riser Extender
    Poly Riser Extenders

    • 3/4" FPT x 3/4" MPT x 1" Riser Extender
    • Also Available in 1/2" FPT x 1/2" MPT configuration
      9110      1.0" Riser Extender - 1/2" FPT x 1/2" MPT
      9115      1.5" Riser Extender - 1/2" FPT x 1/2" MPT
      9115A    1.5" Riser adaptor w/ side 1/4" barb - 1/2" FPT x 1/2" MPT Simple option to retrofit a sprinkler riser to a drip irrigation system
      9120     2.0" Cut-Off Riser Extender - 1/2" FPT x 1/2" MPT
We carry several types of

Irrigation Risers

that are commonly used in most irrigation applications. We also pride ourselves on same-day shipping to ensure on-time delivery.
Italian, Italiano